Image
Image
Image
Image
Image

CUBIQ

In industry, spaces are often difficult to reach, but they still need to be properly and safely lit. Bever Innovations has developed the Cubiq luminaire, a low voltage lighting system that is characterised by an excellent light display and great freedom of installation.

Cubiq runs on only 48 volts and consists of a luminaire, a mounting bracket and a separate driver. These can be placed tens of metres away from each other. It is therefore not necessary to lay 220-volt cables.
This not only offers a solution in places that are difficult to reach, but also in locations where, for example, the temperatures can be very high. Disconnecting the driver from the luminaire increases the lifespan of the driver and considerably simplifies maintenance.

The luminaires can be built in, built up and/or tilted as required, so that every room and every activity can be perfectly lit.

Flexible and versatile lighting solution

Cubiq is a flexible lighting solution that can be easily integrated into various Bever Innovations housings. The Cubiq fixture can be used as a wall lamp, canopy downlight, spotlight and area lighting and is characterised by an excellent light display. One 10 x 10 cm luminaire can illuminate large areas. The luminaires comply with IP67 and are guaranteed dust-free and immersion-proof.

HACCP

On request, Cubiq fittings can be sealed with a specific food-grade sealant. Furthermore, special stainless steel food hoods and installation frames are available. The Cubiq fittings are guaranteed impact-resistant, shatterproof, glass-free and made of easy-to-clean materials, thus fully complying with the International Food Standard (IFS), British Retail Consortium (BRC) Global Standard Food and HACCP guidelines.

Optimal protection, maximum service life

The Cubiq luminaires can be easily adjusted from 0 to 9,000 lumens. Users also have a choice of different optics. Just like the LS Industry LED luminaires, Cubiq luminaires are characterised by guaranteed high colour rendering (CRI 83+) at colour temperature 4000 K. When the temperature of the LEDs on the board rises above 80 ˚C, LIPS automatically switches on; the Luminaire Intelligent Protection System that ensures that the lamp automatically dims. This ensures that the luminaire is optimally protected, without compromising on its service life. Each segment of the PCB is also constantly monitored for voltage peaks, short circuits and temperature excesses. In addition, the luminaires have a Light Normalizer that continuously measures whether there is a drop in light, which - if any - is compensated for automatically.

Part of a standalone, wireless lighting network

The Cubiq fixtures are standard equipped with Bever Smart Technology. This in-house development by Bever Innovations consists of a control board and an antenna, which are cleverly and invisibly built into the lighting fixtures. After installation, the Cubiq fixtures automatically form a standalone, wireless network. They do not only pass information to each other 24/7, but also to other Bever Innovations products. Think for example of the LS LED fixtures and Ambiente fixtures. Although the Cubiqs do not have their own motion and daylight sensors, they can use the measurement data from the other LED products thanks to the Smart network. In addition, it is possible to connect separate daylight and movement sensors to the luminaires.

‘Network completeness’

By analysing the stored data of the luminaires, possibilities arise for 'network completeness' and 100 % predictable maintenance. The data provides insight into current energy consumption, for example.